SYNCHROBLOCK 20/20/6

Synchroblock for filling carbonated liquids (rinsing – filling – close) – automatic machine rotor (rotating) generally intended for rinsing, filling and capping PET bottles (with a volume of 0.2 to 2 liters) with the use of either the gravity filling process and on the basis of the filling level. It is used for filling the following liquids: juices, mineral water, alcohol, etc..

The combination of the three features (rinsing, filling and closing) in a machine provides (ensure) the best timing of the process (as compared with the lines where the flushing, filling and closing are separate components) and easier control: the control is actuated by a controller.
Wash mechanism separates dirt that may fall into the empty bottle at the stage of moving towards filling machine, which ensures the shelf life of the drink.
Features:
 technology was applied to hold the bottle neck, which permits not to adjust the height of the equipment in case of a packaging volume. Set the reset consists of only supporting the bottles elements and the process of transition to another type of bottle takes no more than 10 minutes and requires only no precise settings.
 capping head is a device with adjustable magnetic clutch. It is used to provide a high quality closure without damage cap.
 Attached is the spiral method of dropping the bottle at the outlet of the machine. To change the pattern of the cylinder is not necessary to adjust the height of the output conveyor.
 Built is complete (complex) line, whose rule is triggered by a computer.
 The electrical equipment of the machine consists of components of the leading manufacturers, machine control is performed using a programmable controller.
 All parts in contact directly with food are made of stainless steel, which makes very easy to clean.
 Submission of the cap is through the Pick / Place, which ensures its reliable placement of the cylinder itself closing chapter.
 The design of the machine is made by a system of torsion and ball (no sharp edges), which facilitates disinfection machine.

Base machine constructed so that additional can be added 8 Rinse the tongs 10 Filling and capping head 3 TO INCREASE CAPACITY 2 TIMES.